Best Makita Rotary Hammers At The Moment

Makita 12V Brushless 16mm Rotary Hammer (tool only) HR166DZ

Made for drilling holes up to 16 mm in masonry, this tool is perfect for use by electricians, plumbers, and other craftsmen. This rotary hammer from Makita runs on the slide type 12 V MAx battery platform and is small, light, and easy to use with only one hand. This rotary hammer has a Brushless motor, long runtimes, a vibration-isolating housing, and a well-balanced design, making it suitable for continuous usage throughout the workday.

Features:

  • One Touch Sliding Chuck – SDS plus bit can be installed by simply pressing the bit down into the chuck without the need to slide the collar
  • Two Modes – rotation only for drilling into timber and steel, and rotation plus hammering for masonry drilling
  • LED Joblight – with pre-glow and after-glow function. Light turns on when the trigger is pulled before the motor starts turning and stays on for 10 seconds after trigger release
  • BL Brushless Motor – efficient energy production enabling lower heat production and increased work on a single charge
  • CxT Compact extreme Technology – ultra compact and lightweight design allows users to comfortably handle the tool for prolonged periods of time

Makita 18V 24mm Brushless Rotary Hammer Drill (tool only) DHR242Z

  • Drills in concrete speed is same or surpasses 24V Cordless Combination Hammer model BHR200
  • Has one-touch slide chuck for the SDS plus bit
  • Easy to grip handle
  • Ergonomically made for improved power thrust
  • Secure, comfortable grip if drilling with palm up or down
  • Three-mode operation is: Rotation + Hammering, Hammering only and Rotation only
  • Tool body separated into upper and lower housings at foot of handle portion where housings are jointed with cushioned rubbers that absorb vibrations
  • Better productivity than model DHR202 due to Brushless DC motor that lessens energy loss by 30 percent, delivering greater run-times between charging batteries
  • Rubber joint construction lowers transmission of vibrations to battery terminals which decreases battery failure due to terminal breakage or bad electrical contact

Makita 1100W 2 Mode Rotary Hammer HR4003C

  • Easy to operate operation mode change lever. Located on top of the motor housing for reduced possibility of breakage
  • 11.4 joules of impact power
  • Lock on switch for continuous chiselling applications
  • Torque limiter
  • Trigger switch for intermittent chiselling applications
  • One touch sliding SDS Max type chuck
  • Electronic with: Constant speed control and Soft Start for reducing start-up torque
  • LED power light that indicates trouble with the electric circuit
  • LED service light that indicates when to replace carbon brush
  • Variable speed control by dial
  • Soft grip provides more comfort and control

Makita 1100W 40mm SDS Max Rotary Hammer Drill HR4013C

  • AVT (Anti-Vibration Technology)
  • Vibration absorbing handle is completely separate from the motor housing to produce unrivalled low level of vibration
  • Active Dynamic vibration absorber ensures operation with extremely low vibration
  • Damper spring absorbs force caused by drill bit at the moment of impact
  • Soft No Load reduces vibration of tool body when idling while also minimising deflection of the bit tip from aiming point when starting chipping
  • Easy to operate operation mode change lever. Located on top of the motor housing for reduced possibility of breakage
  • 11.4 joules of impact power
  • Lock on switch for continuous chiselling applications
  • Torque limiter
  • Trigger switch for intermittent chiselling applications
  • One touch sliding SDS Max type chuck
  • Electronic with: Constant speed control and Soft Start for reducing start-up torque
  • LED power light that indicates trouble with the electric circuit
  • LED service light that indicates when to replace carbon brush
  • Variable speed control by dial
  • Soft grip provides more comfort and control

Makita 1500W 2 Mode 52mm Rotary Hammer HR5202C

  • Two On/Off switches switchable in hammering mode
  • Electronic control with; Constant Speed Control, Soft Start, LED service light, LED power light
  • Torque Limiter
  • Easy to operate 2-mode change lever
  • Rotatable side grip
  • Soft grip provides comfort and control

Makita 1500W 2 Mode 52mm Rotary Hammer HR5212C

  • High efficiency and unrivalled low level of vibration
  • The level of vibration is further reduced by completely separating the machine holding section from the motor/transmission section
  • Soft no load function automatically reduces the motor speed during idling to suppress the vibration of the machine body
  • New “Two on/off switches switchable in hammering mode”
  • Easy-to-operate operation mode change lever

Makita 1500W 52mm Rotary Hammer HR5201C

  • High efficiency and durability
  • 2 mode – hammer and hammer with rotation
  • Ergonomically designed handle with rubberised grip provides more control and comfort
  • Selectable two on/off switches on demolition mode
  • One-touch sliding chuck enables easy bit change